There are 2 Ways to Install your SpeakerHeads – Reusing your current head or Buying a New head to use. Choose the Method that’s right for you!
If you are Buying a New head, we recommend using the Trace First Method, which seems to work better with the head off. Once the head is cut, you can then finish installation with it on the drum.
If you are Reusing the head, we recommend the Direct Cut Method, since you can leave it on the drum. For existing port holes, or other products you may be replacing, refer to the Clearance Chart on the page to see what the minimum required space is. In most cases, the SpeakerHeads footprint will cover it !
** PLEASE NOTE: If using a Coated Head, we recommend removing it after installation. Place it Cone Up on a flat surface and apply pressure all around the edge to ensure maximum hold
